Soflmuddin: power stearing pump mod — this increases flow and volume start by removing the fitting out of the back of the pump [url] use a 1" socket [url] use a magnet and pick to remove the fitting the spring and the flow piston [url] then put the flow piston in a vise and removed the end cap with a 7/16 box end wrench [url] [url] what you will find inside is a spring a ball bering a limiting stud and a shim (not shown, looks like a…

Soflmuddin: welderator — Weldernator start with an older style gm alternator as these are the easiest to convert. First thing you do is remove the bolts that hold the case together. then seperate the two halfs. [url] you will not mod this side so just set it aside for now. [url] this is the half where we will do the mods [url] you will be removing: top right is the capacitor, the top center and upper left is the exciter…